POWERPLUS PNEUMATIC TOOL SET 25PCS POWAIR0021

 FEATURES 

• DESCRIPTION (FIG. A):
  • 1. 1/2” Impact wrench
  • 2. 6mm Mini Die Grinder
  • 3. Tyre Inflating Gun
  • 4. Air Blow Gun
  • 5. 5m PE hose with Euro Male & Female Coupler
• Included: 
  • 1 x 1/2” Impact wrench
  • 1 x 6mm Mini Die Grinder
  • 1 x Tyre Inflating Gun
  • 1 x Air Blow Gun
  • 3 x Standard Impact Sockets
  • 2 x Euro Male Coupler with male threaded
  • 2 x Euro Male Coupler with female threaded
  • 1 x Euro Female Coupler
  • 1 x 1/8” Die Grinder Collect
  • 5 x 1/4” Grinding Stones
  • 5 x 1/8” Grinding Stones
  • 1 x 5m PE hose with Euro Male & Female Coupler
  • 2 x Hand wrenches
  • 1 x BMC
• This pneumatic set features a tyre infl ating gun, blow gun, 5m air hose, a mini pneumatic grinder with 10 grinding stones, 4 euro couplers and a quick coupler, 3 sockets, one pneumatic wrench and two hand wrenches. All delivered in a handy suitcase.
• What can you do with this  pneumatic chisel?
  • It’s ideal for general chiselling and demolition. The tool comes in a practical storage case, along with 5 chisels.
• Its strong points:
  • Powerful: At an air pressure of 6,3 bar, this sturdy chisel can reach up to 3500 strks/min. Combined with 4 J of impact energy, it’s able to remove material at a high rate, significantly speeding up your demolition work. Use it to chisel through brick, concrete and stone.
  • Spindle lock: The spindle lock temporarily blocks the chuck, so switching between accessories is quick and easy.
  • Storage case: The pneumatic chisel and its accessories come in a practical storage case, which makes for easy transport and storage.
• Tips & Tricks:
  • Always place the chisel on the surface at a 90° angle. If you hold it at a different angle, the machine might slip, causing injuries to you or damaging the machine.
  • Wear the right protective clothing when working with a chisel. Read the machine’s label or manual to see which gear you’ll need. The Kreator product line offers an extensive range of safety gear e.g., hearing protection, dust masks, safety goggles and more.
  • To prevent accidents caused by (muscle) fatigue, make sure to take plenty of breaks when working with a pneumatic chisel.

SPECIFICATIONS

• Impact wrench: 
  • Square drive: ½” (13mm)
  • Capacity bolt size: 5/8” (16mm)
  • Max. torque: (310Nm)
  • No load speed: 7000min-1
  • Avg. air consumption: 4cfm (114l/min)
  • Operating pressure: 6.3bar
  • Air inlet size: ¼” 
  • Air hose: 3/8” ID
• Mini die grinder: 
  • Grinder cap: 6mm
  • No load speed: 25000min-1
  • Avg. air consumption:3cfm (86l/min)
  • Operating pressure:6.3bar
  • Air inlet size: ¼”
  • Air hose:3/8”ID
• Noise: 
  • Noise emission values measured according to relevant standard.
    • Impact wrench:
      • Acoustic pressure level LpA: 84 dB(A)
      • Acoustic power level LwA: 95 dB(A)
  •  
    • Mini die grinder:
      • Acoustic pressure level LpA: 91 dB(A)
      • Acoustic power level LwA: 102 dB(A)
  •  
    • Air Blow Gun:
      • Acoustic pressure level LpA: 85 dB(A)
      • Acoustic power level LwA: 98 dB(A)
  •  
    • Tyre Inflating Gun:
      • Acoustic pressure level LpA: <70 dB(A)